The Broomfield 200 Series coil winding machine provides for winding up to a 18" (457.2 mm) diameter coil. Six speed ranges allow for various winding speeds and torques.
Motor Equipment: 2 HP (1.5 kW) AC vector motor and drive with foot controlled variable speed
Faceplate: 12" (304.8 mm) diameter
Primary Reduction: Belt and pulley
Secondary Reduction: Two-speed gearbox
Spindle Speeds & Corresponding Torques — Low Speed |
||
---|---|---|
0-30 RPM | 350 ft. - lbs. | (474 Nm) |
0-75 RPM | 140 ft. - lbs. | (190 Nm) |
0-150 RPM | 70 ft. - lbs. | (95 Nm) |
Spindle Speeds & Corresponding Torques — High Speed |
||
---|---|---|
0-120 RPM | 87 ft. - lbs. | (118 Nm) |
0-300 RPM | 35 ft. - lbs. | (47 Nm) |
0-600 RPM | 17 ft. - lbs. | (23 Nm) |
Power Requirement:
Electrical — 220 Volt, three phase, 20 amps (Other voltages available).
Air — 80 PSI (5.5 Bars) at a minimal CFM
Spindle Rotation: Either direction can be selected by a switch on the control panel.
Spindle Center Height: 41.5" (1,054 mm) from the floor
Brake: Electromagnetic spring-set disc brake operated by removing foot from variable speed control, by programmed turns counter, or by pressing the emergency stop button.
Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 2” (50.8 mm) quill travel with quick toggle action and 60° live center.
Maximum Distance Between Centers: 34.5" (876.3 mm)
Maximum Swing Diameter: 20" (508mm)
Machine Control: S-50 winding controller with 50 programmable stops, 7-program capacity, parallel and spiral layering, and end stops to define winding width.
Weight: 1,600 lbs. (725.75 Kg)