The Broomfield 800 coil winding machine has a four speed gearbox and allows for high torque winding of large, heavy coils. This model will pull multiple heavy conductors.
Motor Equipment: 5 HP (3.73 kW), 10 HP (7.46 kW), or 25 HP (18.65 kW) motor with variable speed, foot controlled, vector drive.
Faceplate: 22" (558.8 mm) diameter.
5 HP — Spindle Speeds & Corresponding Torques |
||
---|---|---|
0-5 rpm | 5,252 ft. - lbs. | (7121 Nm) |
0-8 rpm | 3,282 ft. - lbs. | (4450 Nm) |
0-16 rpm | 1,641 ft. - lbs. | (2225 Nm) |
0-24 rpm | 1,094 ft . -lbs. | (1483 Nm) |
10 HP — Spindle Speeds & Corresponding Torques |
||
---|---|---|
0-10 rpm | 5,252 ft. - lbs. | (7121 Nm) |
0-16 rpm | 3,282 ft. - lbs. | (4450 Nm) |
0-32 rpm | 1,641 ft. - lbs. | (2225 Nm) |
0-48 rpm | 1,094 ft. - lbs. | (1483 Nm) |
25 HP — Spindle Speeds & Corresponding Torques |
||
---|---|---|
0-25 rpm | 5,252 ft. - lbs. | (7121 Nm) |
0-40 rpm | 3,282 ft. - lbs. | (4450 Nm) |
0-80 rpm | 1,641 ft. - lbs. | (2225 Nm) |
0-120 rpm | 1,094 ft. - lbs. | (1483 Nm) |
Power Requirement:
Electrical
5 HP: 220V, three phase, 40 amps
10 HP: 460V, three phase, 20 amps
25 HP: 460V, three phase, 40 amps
(Other voltages available)
Air — 80 PSI (5.5 bar) at minimal CFM
Spindle Rotation: Either direction can be selected by a switch on the control panel.
Spindle Center Height: 49.5" (1257.3 mm) from the floor.
Brake: Electromagnetic spring set disc brake (for 5 hp) or air actuated disc brake (above 5 hp) operated by removing foot from variable speed control, by total turns counter or by emergency stop button.
Spindle Brake: Air/hydraulic actuated caliper on 28" (711.2 mm) disc on the output spindle.
Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4" (101.6 mm) quill travel. 60° live center in No. 5 or No. 6 morse taper.
Maximum Distance Between Centers:
800B and 800C: 65" (1651 mm)
Maximum Swing Diameter:
800A: 98" (2489.2 mm)
800B and 800C: 74" (1879.6 mm)
Maximum Weight Capacity:
30,000 lbs. (13,607.77 kg) between centers
5,000 lbs. (2,267.96 kg) cantilevered
48" (1219.2 mm) from the spindle
Machine Control:
A and B Models: Programmable electronic counter.
C Model: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering and end stops to define winding width.
Weight
800A: 4,800 lbs. (2,177.24 kg)
800B: 6,600 lbs. (2,993.71 kg)
800C: 18,000 lbs. (8,164.66 kg)