The Broomfield 700 winder is a single speed, high torque winder that can handle large, heavy coils. This heavy duty winder can be manufactured with various speeds and torques according to your application requirements.
Motor Equipment: 5 HP (3.73 kW) - 30 HP (22.38 kW) AC motor with foot controlled, variable speed vector drive.
Faceplate: 22" (558.8 mm)
Primary Reduction: Belt and pulley
Secondary Reduction: Gear reducer
Spindle Speed: Per application
Maximum Torque: 3,500 ft. lbs. (4746 Nm)
Power Requirement:
Electrical
5 HP: 220V, three phase, 40 amps
10 HP - 30 HP: 460V, three phase
(Other voltages available)
Air — 80 PSI (5.5 bars) at minimal CFM
Spindle Rotation: Either direction can be selected by a switch on the control panel.
Spindle Center Height: 43" (1092.2 mm) from the floor.
Brake: Electromagnetic spring set disc brake (for 5 HP) or air actuated disc brake operated by removing foot from variable speed control, by total turns counter or by emergency stop button.
Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4" (101.6 mm) quill travel. 60° live center in No. 5 or No. 6 morse taper.
Maximum Distance Between Centers:
700B and 700C: 65" (1651 mm)
Maximum Swing Diameter:
700A: 83" (2108.2 mm)
700B and 700C: 63" (1600.2 mm)
Machine Control:
A and B Models: Programmable electronic counter
C Model: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering and end stops to define winding width.