The Broomfield 400 Series coil winding machine has a large diameter winding capacity and can be purchased without a wire guide traverse mechanism, for hand winding.
Motor Equipment: 3 HP (2.24 kW) AC Vector motor and drive with foot controlled variable speed.
Faceplate: 14" (356 mm) diameter
Primary Reduction: Belt and pulley
Secondary Reduction: Four speed gearbox
Spindle Speeds & Corresponding Torques (Low) |
||
---|---|---|
0-28 rpm | 560 ft. - lbs. | (759 Nm) |
0-73 rpm | 214 ft. - lbs. | (290 Nm) |
0-110 rpm | 142 ft. - lbs. | (193 Nm) |
0-295 rpm | 52 ft. - lbs. | (70 Nm) |
Spindle Speeds & Corresponding Torques (High) |
||
---|---|---|
0-55 rpm | 285 ft. - lbs. | (386 Nm) |
0-146 rpm | 108 ft. - lbs. | (146 Nm) |
0-220 rpm | 70 ft. - lbs | (95 Nm) |
0-590 rpm | 27 ft. - lbs. | (37 Nm) |
Power Requirement:
Electrical — 220 volt, three phase, 20 amps (Other voltages available).
Spindle Rotation: Either direction can be selected by a switch on the control panel.
Spindle Center Height: 43" (1092 mm) from the floor
Brake: Electromagnetic spring-set disc brake
Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4” (102 mm) quill travel and 60° live center in number 4 Morse taper.
Maximum Distance Between Centers:
400B and 400C: 42.5" (1080 mm)
Maximum Swing Diameter:
400A: 83" (2108 mm)
400B: 63" (1600 mm)
400C: 32" (813 mm)
Machine Control:
400A and 400B: Programmable Electronic Counter.
400C: Broomfield S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering, and end stops to define winding width.
Weight:
400A: 1,200 lbs. (545 Kg)
400B: 2,200 lbs. (1000 Kg)
400C: 2,600 lbs. (1180 Kg)