MRI Winding Machines

Superconducting Magnetic Resonance Imaging

Broomfield Superconducting Magnetic Resonance Imaging (MRI) Winding Machines accommodate a wide range of coil sizes, styles, and wire types—from smaller extremity diagnostic units to larger MRI systems with former diameters exceeding 2 meters.

---

• Superconducting wire precision tension control.
• Wet or dry winding.
• Servo driven tension control.
• Automatic wire dereeler alignment with guide arm.
• Multi-axis servo driven motion.
• Heavy-duty welded steel construction for superior strength.
• AC Vector drives for precise speed control.
• Servo wire guide traverse with various programmable layering modes and auto servo height adjustment.
• Control station custom configured to your application.
• Programmable or quick-select touch screen wire tension control.
• Linear wire usage readout.
• Live wire tension display.
• Data collection and logging.
• Powerful, precision laser vision systems to monitor wire layering.
• Laser safety scanners for operator protection.

---

Headstock and Tailstock Connection: Steel faceplate or a 3-jaw self-centering chuck.

Primary Reduction: Timing belt and pulleys.

Secondary Reduction: Gear reducer or multi-speed gearbox, depending upon model.

Spindle Rotation: Either direction can be selected.

Spindle Center Height: 43" (1092.2 mm) from the floor or as required to accommodate coil diameter swing.

Brake: Brake on the main drive motor and also after the gear reduction on the output shaft, operated by removing foot from variable speed control, by total turns count programming or by emergency stop button.

Tailstock: Various styles of precision, adjustable position, locking tailstocks.

Maximum Distance Between Centers: As required by customer needs.

Maximum Swing Diameter: As required by customer needs.

Machine Control: MP-5 Controller.
Custom control systems can be provided as needed.

Motor Equipment: AC Vector duty motor and controller with variable speed that can be foot controlled, dial controlled or programmed.

Spindle Speeds and Corresponding Torques: Various speed range choices. Torque available up to 5,200 ft. lbs (7050 Nm).

Power Requirements:
Electrical From 208 - 480 volt, 50 or 60 hertz
(Other voltages available).

Air 80 PSI (5.5 Bar) at minimal CFM.

Weight: Varies according to machine model and configuration.

---

• Special controls.
• Side pressure packer on wire turns.
• Multi-wire guide assembly.
• Special wire guide pulley sizes and configurations.
• Automatic Run.
• Longer or shorter machine length.
• Larger or smaller coil swing diameters.
• Other machine power ranges.
• Winding area guard, safety zone floor pads or light curtains.
• Paper or fiberglass insulation dereeler/tensioners.
• Multiple coil winding.
• Custom modifications for special applications.