100 Series Coil Winding Machines

Multi-speed coil winding machine.

The Broomfield 100 Series coil winding machine provides for winding up to a 10" (254 mm) diameter coil. Four speed ranges allow for various winding speeds and torques.

---

• Four spindle speed ranges with variable speed within each range (Maximum speed: 5,031 RPM).
• Electrically actuated brake for positive stopping.
• Electronic wire guide traverse. Two precision layering styles are provided, parallel and spiral.
• Set-up time is minimized by use of electronic controls for setting wire pitch and stopping at the desired turns count. The operator only needs to enter this data and set the winding width stops.
• Easily adaptable for winding single or multiple coils.
• An optional MP-5 control offers greater programming power.

---

Motor Equipment: 1 hp (0.746 kW) AC Vector motor and drive with foot controlled variable speed.

Faceplate: 8" (203 mm) diameter.

Reduction: Belt and pulley.

Power Requirements:
Electrical 220 Volt, three phase, 15 amps (Other voltages available).

Spindle Rotation: Either direction can be selected by a switch on the control panel.

Spindle Center Height: 37" (940 mm) from the floor

Brake: Electronically actuated brake operated by removing foot from variable speed control, by programmed turns count, or by emergency stop button.

Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 2” (50.8 mm) quill travel with quick toggle action and 60° spring loaded live center.

Maximum Distance Between Centers: 24" (609.6 mm)

Maximum Swing Diameter: 12" (304 mm)

Machine Control: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering, pitch increment .0001" (.003 mm) and end stops to define winding width.

Weight: 1,000 lbs. (454 kg).

---

• Broomfield MP-5 Controller automatically coordinates winding functions and provides for program storage.
• Multi-wire guide assembly.
• Automatic run.
• Longer machine length.
• Lower speed ranges.
• Custom modifications for special applications.
• Winding forms and toolings.
• Winding area guard.

Spindle Speeds & Corresponding Torques
0-795 RPM	79 in. - lbs.	(9.0 Nm)
0-1,635 RPM	38 in. - lbs.	(4.3 Nm)
0-3,290 RPM	19 in. - lbs.	(2.1 Nm)
0-5,031 RPM	12 in. - lbs.	(1.4 Nm)