Description:
The standard control package on all Broomfield Coil Winding Machines with automatic wire guide systems is the Broomfield S-50. This device provides for "at the machine" programming of wire guide pitch, automatic spindle slowing/stopping and layering style (parallel or spiral). The winding area is defined by operator positioned manual end stops.

Features:

• Pitch values range from 0.0000" to 3.0000"
  (0.00mm to 76.20mm)
• Wind modes are Parallel or Spiral.
• Turn Count ranges from 0.00 to 99999.99 and can display negative values.
• Operator can specify the turn count for a Slow and for a Stop.
• There can be as many as 50 Slow and Stop points per program.
• Seven sets of coil winding data (programs) may be stored.
• Left and Right end stop contacts define the winding area by causing the traverse to reverse direction.
• Traverse Left and Traverse Right Direction buttons and Traverse Direction arrows are provided.
• Traverse Home Left and Home Right buttons send the wire guide arm to the corresponding end stop.
• Traverse Jog Left and Jog Right buttons allow for incremental wire guide traverse motion but also include progressive acceleration for quicker setup of a wide traverse.
• Traverse Jog may be used during winding to make minor wire guide traverse position changes.
• The display has two lines of 40 characters each and a numeric keypad.
• The Broomfield S-50 can continue running from the same place following a shut down or power loss. After powering back up, the control will display the same position within the coil that it displayed prior to the loss of power.

For S-50 questions or more information, please contact our sales team at (978) 779-6600 or through our online form.